Products and Accessories
Flowrest® Device The main unit houses the blower, internal heater, heater plate, display, control panel, and all the electronics that control air flow and temperature. Using no water internally, the Flowrest® requires no internal cleaning or disinfection. Flowrest® with Disposables (except Cannula, Head Gear) Includes: Flowrest® Base Unit, Power Cord, Canister/Vapor Cartridge, Insulated Tube, Fine Filter, Pollen Filter. Flowrest® without Disposables Includes: Flowrest® Base Unit, Power Cord. |
|
||||||||||||||||||||||||||||||||||||||||||
|
Breathelite™ Patient Interface (cannula & headgear) Patient interface support options include around the neck, over the crown of the head or both.
|
|||||||||||||||||||||||||||||||||||||||||||
|
Breathelite™ Cannula Simple nasal interface that's lightweight, soft and customizable for patient comfort. Depending on where you place the Flowrest® unit, the left/right adapter allows the cannula delivery tube to be attached on either side. |
|
||||||||||||||||||||||||||||||||||||||||||
|
Breathelite™ Support (headgear) |
|||||||||||||||||||||||||||||||||||||||||||
|
Breathelite™ Arm Band Tube Support An optional upper arm band tube support is also available with an adjustable strap secured by velcro for patient comfort. Flowguard™ Insulated Delivery Tube Unique light-weight design utilizes a tube within a tube and carries conditioned patient gas from the cannister to the Breathelite™ nasal cannula without traditional heated wire, 6 feet in length. |
![]() ![]() |
||||||||||||||||||||||||||||||||||||||||||
|
Flowguard™ Oxygen Adapter If oxygen is prescribed, an optional adapter fits between the canister and the delivery tube to allow connection of an oxygen concentrator.
|
![]() |
||||||||||||||||||||||||||||||||||||||||||
|
Filter - Pollen Large grey foam rectangle. Replace when filter appears dirty. |
|||||||||||||||||||||||||||||||||||||||||||
|
Filter - Ultra Fine Small white inner rectangle. Replace when filter appears dirty. |
|||||||||||||||||||||||||||||||||||||||||||
|
Humidification Canister Assembly Contains the water reservoir, gas pathways and humidity cartridge.
|
|||||||||||||||||||||||||||||||||||||||||||
|
HFT™ Vapor Cartridge The HFT™ Vapor Cartridge attaches to the bottom of the Humidification Canister. Distilled water enters the HFT™ Vapor Cartridge through a one-way valve. The water in the vapor cartridge is then heated by the heater plate on the main unit. Because of the unique design of the vapor cartridge, it's possible to heat a smaller volume of water than with conventional pass-over humidifier systems, allowing for efficient humidification. |
|
||||||||||||||||||||||||||||||||||||||||||
Recommended Supply Replacement Schedule
| HFT™ Vapor Cartridge | every 30 days |
| Humidity Canister | every 180 days |
| Flowguard™ Delivery Tube | every 90 days |
| Breathelite™ Support (headgear) | every 180 days |
| Breathelite™ Cannula | every 15 days |
| Flowguard™ Oxygen Adapter | every 180 days |
| Distilled Water | each day |







.jpg)



